Measurement Card Template

This template is for a one-page bench card that lets a technician prove the most important measurements on a model without scanning the full guide first.

How to Use This Card

Use this only after the machine is simplified to a known-good baseline.
Record actual readings where possible.
If a reading is correct but the complaint survives, stop using the card and move back into the full guide.

Use This Card When

the symptom matches the model's highest-value failure branches
a quick live-reading split is more useful than a full document walk-through
the machine is already identified and the fitted package is known

Prove First

correct input power
correct process and polarity
clean clamp or current return
known-good external accessory path where applicable

Fast Measurement Card

Checkpoint	Where to measure or observe	Healthy expectation	If abnormal, keep diagnosis in...
named checkpoint	exact connector, point, or behavior	value, range, or behavioral expectation	the subsystem that should still be considered first

Stop Rules

Stop and fix the external path if branch power, clamp, polarity, gas, air, or accessory fit clearly explains the complaint.
Stop and reset state first if the model has a known stored-state or mode-state trap.
Stop and open the full guide when a reading conflicts with the rest of the symptom story.

Open Next

full model guide
bench test sheet
local manifest or schematic reference