M185 Accessories

MIG/Flux Welder M185 (CSA) IGBT Inverter, 220 V Input
MIG/Flux Welder M185 (CSA) IGBT Inverter, 220 V Input
  • Part No: KMM52000

Price:   799.00C$ FREE SHIPPING

Sold Outpayment methods

M185 IGBT INVERTER MIG / FLUX CORE WELDER

Build for Professional MIG Welding

  • > Welds 24-gauge mild steel up to 3/8 inch in a single pass with maximum180A output.
  • > Fine-tune arc with continuous voltage control, outperforms fixed heat setting in transformer welders.
  • > Professional features like digital preset A/V meters and electronic inductance control
    set M185 apart from other 180 Amp MIG welders.
  • > State of art IGBT inverter technology cuts energy costs by 25% with more than 80% efficiency.
  • > Weld a wide range of materials with a fast, easy tools free set-up and multi-function preset display.
  • > High reliability & durable is guaranteed with moisture-proof, salt spray-proof, corrosion-proof IP23 design.

Product Highlight

Preset & monitor settings with digital V/A meters

High contrast easy-read digital meter access voltage, current and wire speed under direct outdoor sunlight or strong arc flash.

Electronic induction control

The less inductance you have the crisper the arc will appear and the wires will start easier.More inductance will make the arc appear "softer" with a flatter wider appearance and if too much is used, wires will stumble during starts.

Protection with indicator light

Built-in temperature, voltage and current sensors provide maximum protection for operator and machine.

Details Preview

Infinite Voltage, Infinite Wire Feed,
Infinite Possibility!

  • Unlike to its transformer-based counterparts, M185 features an continuous voltage control that allows you to fine tune the voltage independently of the wire feed speed. Use the control to gain more freedom in making the weld puddle perform the way you want it to. Dial out spatter or control the weld puddle while welding overhead. Infinite voltage control puts total control of the welding arc in your own hands, allowing you to get the results you want.

Aluminum cast wire feeding system

  • > Experience smooth wire feeding and less wire jamming.
  • > Precision full-adjustment drive system reduces chance of wire tangling.
  • > Durable gear box delivers added drive torque and quiet operation.
  • > Detachable professional MIG torch can be easily upgrade to longer lead.

Advanced IGBT inverter technology provides outstanding welding performance

Built-in with wire end ball elimination (burn-back),, hot-start and crater fill to optimize for fast and soft arc strike and perfect arc finish.

Unprecedented 72V open circuit voltage make it is extremely easy to start arc at exceptional smooth arc ignition at rust surface.

Forgiving arc makes dialing in your application easy, excellent out-of-position arc stability, low spatter and a wide voltage sweet spot.

Specification - All parameters are certified by Canadian Safety Association (CSA)

  • Input
  • Duty cycle
  • Maximum amperage output
  • Minimum amperage output
  • Open circuit voltage
  • Consumables
  • Spool size
  • Welding wire
  • Welding capacities
  • Dimension
  • Weight
  • 208/230 volt, single phase
  • 30% @ 140 amps, ambient temperature 104F (40°C)
  • 180 amps
  • 40 amps
  • 72 volts
  • Tweco style replacement parts
  • 4 inch and 8 inch
  • 0.023 and 0.035 inch solid and flux-cored wire
  • 24-gauge mild steel, up to 3/8 inch
  • 18.5 x 8.4 x 15.7 inch (471 x 213 x 400 mm)
  • 24 lb(11 kg)

Package come complete with

Easy 4 steps for return and replacement

This product is covered by

1 year (up to 4 year) warranty in Canada!

Contact customer service or Submit warranty claim.

Receive prepaid return label through email.

Drop off to any Canadian post location.

Wait for the refund or replacement.

Featured Reviews on YouTube

Hard Core Field Review

>>> Watch More Video Reviews Here

>>> Ask a question about this item