On Sale

Product Highlight

Uses standard compressed air source

Built-in air pressure gauge and pressure adjustment control provides optimized result at various output power.

Protection with indicator light

Built-in temperature, voltage and current sensors provide maximum protection for operator and machine.

Reliability is guaranteed

> Moisture-proof design.
> Salt spray-proof design.
> Corrosion-proof design.

Details Preview

One Knob Does It All!

> Advanced intelligent control technology automatically optimizes cutting parameters — just turn one knob and cut like a pro!
> On-the-spot, infinitely adjustable amperage control gives you the perfect cut every time.

High-Frequency Start System

> Powerful high-frequency arc ensures safe, precise arc initiation without touching the metal.
> Proven technology delivers reliable starts, stable performance, and rapid arc re-strike.
> No moving parts in the start system - minimizing arc start failures and maximizing durability.

Advanced inverter technology leads to outstanding cutting performance

Unprecedented precision and cutting speed.

Achieve edge angularity of two degrees or less with virtually no dross build-up.

Reduced warping, and a small heat-affected zone, resulting in fewer secondary operations.

Specification - All parameters are certified by Canadian Safety Association (CSA)

Input
Duty cycle
Maximum amperage output
Minimium amperage output
Circuit breaker requirement
Generator requirement
Open circuit voltage
Optimized cutting
Recommended cutting
Severance cutting
Compressed air pressure
Dimension
Weight

208/230 volts, 60Hz single phase
40% @ 40 amps, 60% @ 36 amp, 100% @ 30 amp
40 amps
20 amps
50 amps 220V
5000W non-inverter type generator recommended
450 volts
3/8 inch @ 10 inch per minute for mild steel
1/2 inch @ 7 inch per minute for mild steel
5/8 inch @ 4 inch per minute for mild steel
43.5 psi (0.3 mpa) @ 3.5 cfm
16.5 x 6.4 x 8.3 inch (420x136x210 mm)
15.4 lb (7 kg)

Package come complete with

5ft (1.5m) power cord with NEMA 6-50P 220V "welder" plug

SG55 industrial plasma cutting torch with 16ft (6m) lead

200A ground clamp with 10ft(3m) lead and Dinse 25 plug

P40 power source

Easy 4 steps for return and replacement

This product is covered by

1 year (up to 4 year) warranty in Canada!

Contact customer service or Submit warranty claim.

Receive prepaid return label through email.

Drop off to any Canadian post location.

Wait for the refund or replacement

>>> Check P40 CSA Safety Certification

Featured Reviews on YouTube

Hard Core Field Review

>>> Watch More Video Reviews Here

Why it is important to specify the travel speed when compare the thickness of a plasma cutter can cut?

Many manufactures never rate the cutting thickness with speed. It is meaningless because if slow down the speed even a weak machine will cut through thick metals, but it is impossible to cut with such slow speed in reality.
Do not be fooled by the cutting capacity without travel speed in specification!
What does OCV mean? How OCV affect the performance of cutting?

"OCV" stands for "Open Circuit Voltage", which is the voltage to strike the plasma arc. The "OCV" had a enormous impact on the ignition capacity of a plasma cutter. the higher OCV, the easier to cutting on rough, painted, and rusty surfaces and different materials. KickingHorse P40 rated highest-in-class 450V "OCV", this is the reason why with the same 40A, P40 capable of cutting through 1/2 inch while many 40A plasma cutters only cut 3/8 inch.
When comparing plasma cutters, remember to check not only output current but also "OCV" value!
Does this machine need to touch the metal to start the arc?

No. Thanks to the built-in high-intensity high-frequency start system, the arc automatically initiates when the torch tip is close to the metal when torch trigger is pressed - no contact required.
What size generator do I need to run this plasma cutter?

KickingHorse® P40 hight performance plasma cutter need minimum 5KW generator to run at max capacity. However, you always can dial down the current to run off smaller generator.
Will P40 cut aluminum?

Yes, P40 is capable of cutting mild Steel, aluminum, copper, crass, galvanized metal.
What plug this welder comes with? Do I need to purchase a extra plug?

KickingHorse® P40 is ready to use with UL certified north American 12 AWG Power Cord and NEMA 6-50P "Welder" Plug.
What is 40% duty cycle @ 40A mean?

KickingHrose® P40 allows welder to run 4 minutes at 40A out of each 10-minute period without overheating- at ambient temperature of 104F (40℃), not 70F (21℃)! Most of plasma cutting machine manufactures, include major North American producers, determine their consumer grade welding machine's duty cycle at 70F (21℃). It is important that you, as a purchaser , ask manufacture exactly how the duty cycle is calculated!
Does it have Canadian safety approval? What happens if I use non - certified welder in Canada?

KickingHorse® P40 is CSA certified plasma cutting inverter and is safe and legal to operate both on-site and in house. In Canada, before decide to purchase any plasma cutting machine without CSA certification, you must consider not only the safety of the employees, your family members and properties, but also the legal, financial and insurance consequence may face by using non-safety approval equipment, no matter at work place or in home.
The Fines for Non-Compliance are Very Heavy in Canada!