CUT65 Measurement Card

This is the quick live-reading card for the highest-value CUT65 pilot, pressure, and torch-mechanics splits.

Use This Card When

pilot is intermittent
postflow is normal but start still fails
pressure or RV1 changes the complaint

Prove First

fresh A81 front-end stack
dry air source with pressure verified under flow
clean clamp path on bright metal

Fast Measurement Card

Checkpoint	Where to measure or observe	Healthy expectation	If abnormal, keep diagnosis in...
Postflow sequence	air after trigger release	normal and repeatable	air or control branch
Pilot behavior	start attempt on clean steel	stable pilot with no abnormal dropout	torch-head, pressure, or RV1 branch
Pressure sensitivity	compare within the normal working range	complaint does not disappear only at one edge setting	air branch
Tracking behavior if guide hardware is used	compare freehand and guided cut	guide hardware does not create the complaint	guide or stand-off branch

Official Parts Shortcuts

Use these only after the readings prove the complaint follows the torch, guide, or air branch.
CUT60 and CUT65 parts category: official parts path
A81 torch 07001400: use the official parts path above.
2-leg stand-off 07CV0026: use the official parts path above.
Circle kit 07CV0052: use the official parts path above.

Stop Rules

Stop if pressure correction restores pilot cleanly.
Stop if guide hardware is the only branch still failing.
Stop using the card and open the full guide if pilot, pressure, and torch-mechanics evidence still conflict.

Open Next