ThunderCut65 Measurement Card

This is the quick live-reading card for the highest-value ThunderCut65 pilot, restrike, and torch-head splits.

Use This Card When

postflow is normal but start still fails
restrike is delayed after warm-up
pressure or RV1 seems to change the symptom

Prove First

fresh A81 front-end stack
dry air source with stable pressure under flow
clean clamp path on bright metal

Fast Measurement Card

Checkpoint	Where to measure or observe	Healthy expectation	If abnormal, keep diagnosis in...
Postflow sequence	air after trigger release	normal and repeatable	air or control branch
Pilot behavior	start attempt on clean steel	stable pilot with no abnormal delay	torch-head, pressure, or RV1 branch
Restrike behavior	repeated starts after warm-up	no long wait time or abnormal dropout	torch-head or air branch
Tracking behavior if guide hardware is used	compare freehand and guided cut	guide hardware does not create the complaint	guide or stand-off branch

Official Parts Shortcuts

Use these only after the readings prove the complaint follows the torch, guide, or air branch.
ThunderCut65 parts category: official parts path
A81 torch ecosystem: official A81 parts path
Guide carriage 07CV0051: official product page
Stand-off guide 07CV0028: official product page

Stop Rules

Stop if pressure or RV1 correction changes the symptom immediately.
Stop if guide hardware is the only branch still failing.
Stop using the card and open the full guide if pilot, restrike, and torch-mechanics evidence still conflict.

Open Next