MA200TS 3-in-1|Parts

Multiprocess Welder MA200TS(CSA) IGBT Inverter, 220 V Input
Multiprocess Welder MA200TS(CSA) IGBT Inverter, 220 V Input
  • Model: KMP52000

Price:   $699.00 - include FREE SHIPPING in Canada.

Sold Outpayment methods

MA200TS IGBT INVERTER MIG | FCAW | STICK WELDER

Build more with Multi-process !

  • > Brutal 200A of MIG output and 180A of STICK output. MA200TS is ultimate tool to meet all home welding needs.
  • > Build to run-off generator. Optimized for dirty power and fluctuating voltage, great for field welding.
  • > MIG weld 24-gauge mild steel up to 1/2 inch. STICK weld 5/16 inch plate in a single pass and burn 3/16 inch rod.
  • > Precisely control the weld by presetting current, voltage, wire feed speed, arc force and induction before strike the arc.
  • > High reliability & durable is guaranteed with moisture-proof, salt spray-proof, corrosion-proof IP23 design.

Product Highlight

Preset & monitor settings with digital V/A meters

High contrast easy-read digital meter access voltage, current and wire speed under direct outdoor sunlight or strong arc flash.

Optimized for dirty or unreliable power

Advance wide spectrum voltage regulation technology delivers consistent arc performance from 160 volt up to 270 volt input. Optimized for running off generator or welding in field.

Protection with indicator light

Built-in temperature, voltage and current sensors provide maximum protection for operator and machine.

Details Preview

Infinite Electronic Induction,
Take MIG performance to next level!

  • Independent induction control is normally only found on larger industrial welders, together with other professional features like digital preset A/V meters and arc force control set MA200TS apart from its competitors.
    With less inductance you have the crisper the arc will appear and the wires will start easier.
    More inductance will make the arc appear "softer" with a flatter wider appearance and if too much is used, wires will stumble during starts.

Aluminum cast wire feeding system

  • > Durable gear box delivers added drive torque and quiet operation. Experience smooth wire feeding and less wire jamming.
  • > Precision full tension adjustment drive system reduces chance of wire tangling.
  • > Fast tool-less drive roll changeovers.
  • > Detachable professional MIG torch can be easily upgrade to longer lead.

Advanced IGBT inverter technology provides outstanding welding performance

Built-in with wire end ball elimination (burn-back), hot-start and crater fill to optimize for fast and soft arc strike and perfect arc finish.

In STICK mode arc force kicks in when your rod is about to stick to workpiece. Increase the value will reduce the tendency of electrode sticking while welding.

Forgiving arc makes dialing in your application easy, excellent out-of-position arc stability, low spatter and a wide voltage sweet spot.

Specification

  • Input
  • Duty cycle
  • Maximum amperage output
  • Minimum amperage output
  • Open circuit voltage
  • Consumables
  • Spool size
  • Welding wire
  • Welding capacities

  • Dimension
  • Weight
  • 208/230 volt, single phase
  • 30% @ 180 amps, ambient temperature 104F (40°C)
  • MIG: 200 amps; STICK: 180 amps
  • MIG: 40 amps; STICK: 10 amps
  • 65 volts
  • Tweco style replacement parts
  • 4 inch and 8 inch
  • 0.023 and 0.035 inch solid and flux-cored wire
  • MIG: 24-gauge mild steel, up to 1/2 inch
    STICK: burns 3/16 inch rod and welds 5/16 inch plate
  • 15.7x 8.3 x 13.4 inch (400 x 210 x 340 mm)
  • 26.5 lb (12 kg)

Package come complete with

Easy 4 steps for return and replacement

This product is covered by

one year free replacement warranty!

Contact customer service.

Receive prepaid return label through email.

Drop off to any Canadian post location.

Wait for the refund or replacement.

All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.