TIG200PACDC Fault Workflow Router

This router gives the fastest document order for the highest-value TIG200PACDC complaints.

Complaint Routing

Incoming complaint	Open first	Then open	Then open if the complaint remains	Why this order works
DC TIG is healthy but AC TIG is still bad	TIG200PACDC measurement card	TIG200PACDC guide	TIG200PACDC board opening map	AC-versus-DC proof belongs ahead of deeper opening
the complaint follows the pedal branch only	TIG200PACDC parts substitution card	TIG200PACDC measurement card	TIG200PACDC board opening map	external-control proving comes first, and remote-isolated local control confirms whether anything internal is still left
shielding-flow complaint only	TIG200PACDC parts substitution card	TIG200PACDC guide	TIG200PACDC job packet	gas-only complaints stay external before the machine is opened
stick works but TIG still fails	TIG200PACDC measurement card	TIG200PACDC board opening map	TIG200PACDC guide	the fastest path is to hold the healthy process steady and isolate the TIG branch

Official Parts Exit Paths

If the complaint proves external at any point in the router, use the official parts flow instead of continuing into board work.
TIG200PACDC parts category: official parts path
Gas regulator branch 07000510: use the official parts path above.
Gas hose branch 072611120: use the official parts path above.

Stop Rules

Stop if the complaint follows one pedal only.
Stop if DC TIG is healthy and only AC remains faulty.
Stop if local control is healthy with the remote isolated and only the pedal branch still fails.
Stop and move to the full guide if gas, AC, and pedal evidence still overlap after the first pass.

Open Next