MA200TS Fault Workflow Router

This router gives the fastest document order for the highest-value MA200TS complaints.

Complaint Routing

Incoming complaint	Open first	Then open	Then open if the complaint remains	Why this order works
wire feeds at power-up	MA200TS measurement card	MA200TS job packet	MA200TS board opening map	the measurement card proves the support-power and trigger branch first, then the packet and map carry the internal work
machine powers for one second then shuts off	MA200TS measurement card	MA200TS board opening map	MA200TS job packet	startup collapse needs the fastest jump from symptom to support-power files
display stays pinned at maximum	MA200TS measurement card	MA200TS board opening map	MA200TS guide	the meter-response proof comes first, then the opening map keeps the work inside feedback and control
plain-steel MIG is healthy but aluminum mode or TIG mode fails	MA200TS parts substitution card	MA200TS measurement card	MA200TS guide	this order keeps package and setup faults ahead of shared-board blame
complaint exists only in aluminum mode or TIG mode	MA200TS parts substitution card	MA200TS guide	MA200TS job packet	optional-kit complaints still belong to the package path before internal repair

If the complaint proves external at any point in the router, use the official parts flow instead of continuing into board work.
MA200TS accessories entry: official accessories path
Aluminum kit XOM99035: official product page
Product and package baseline: official MA200TS product page

Stop if the machine is not yet proven on healthy 208 / 230 V input or suitable generator support.
Stop if plain-steel MIG baseline is healthy and the complaint follows only one optional kit.
Stop if the complaint depends on pedal-style TIG control. That is not the supported baseline here.
Stop if feed setup or gas regulation explains the symptom cleanly.
Stop and move to the full guide if support-power, feedback, and feed-path evidence still overlap after the first pass.