CUT65 Fault Workflow Router

This router gives the fastest document order for the highest-value CUT65 complaints.

Complaint Routing

Incoming complaint	Open first	Then open	Then open if the complaint remains	Why this order works
pilot changes with pressure correction	CUT65 measurement card	CUT65 parts substitution card	CUT65 guide	pressure-sensitive pilot belongs in the air branch before opening the machine
postflow is normal but start still fails	CUT65 measurement card	CUT65 board opening map	CUT65 guide	the fastest split is torch-head mechanics versus control branch
guide or stand-off hardware may be the whole complaint	CUT65 parts substitution card	CUT65 guide	CUT65 job packet	tracking complaints stay external and mechanical first, with freehand proof ahead of stand-off or circle-kit blame
pilot becomes unstable after warm-up	CUT65 measurement card	CUT65 board opening map	CUT65 job packet	warm pilot drift needs pressure and pilot-current proof before board blame

Official Parts Exit Paths

If the complaint proves external at any point in the router, use the official parts flow instead of continuing into board work.
CUT60 and CUT65 parts category: official parts path
A81 torch 07001400: use the official parts path above.
2-leg stand-off 07CV0026: use the official parts path above.
Circle kit 07CV0052: use the official parts path above.

Stop Rules

Stop if pressure correction restores pilot.
Stop if guide hardware is the only failed branch.
Stop if freehand cutting is healthy and only stand-off or circle hardware changes the complaint.
Stop and move to the full guide if pilot, pressure, and torch-mechanics evidence still overlap after the first pass.

Open Next