KickingHorse Job Packet Pack

This pack groups the highest-value KickingHorse technician job packets so a repair can be run from one packet instead of jumping across the library.

How to Use This Pack

Start with the packet that matches the incoming model.
Capture intake evidence before opening the machine.
Stage likely wear items, kits, and local reference files before diagnosis deepens.
Finish with the packet's bench test and release signoff.

A100: capture breaker size, cord length, source type, rod type, and lead polarity before teardown. The core proof target is stable 3/32 in 7018 or 6010/6011 welding on a 20 A or healthy 3 kW baseline.
A220: capture real source strength, adapter path, rod type, and lead polarity before teardown. The core proof target is stable high-load 7018 or 6010/6011 welding on a real 230 V or healthy 5 kW baseline.
For both arc models, if the complaint disappears with better source, correct polarity, heavier external current path, or if the complaint is really improvised TIG use, stop the packet before internal repair.

F130: capture exact wire size, whether the machine is still on factory 0.035 in baseline or on a proper 0.030 in conversion, and capture branch, cord, or generator details before teardown.
M185: capture startup display state, inductance setting, source voltage, and breaker path before teardown, because display complaints can still be driven by setup or source weakness.
For both MIG models, if the complaint disappears with correct wire-size setup, torch-front-end correction, better source quality, or the correct breaker path, stop the packet before internal repair.

Model	Packet	Best used for
A100	job packet	dead-machine splits, no-OCV proving, polarity checks, and blinking-light or fan-collapse complaints
A220	job packet	utility-path proving, polarity checks, hot current-path hardware, and top-end arc complaints
F130	job packet	trigger-state proving, breaker-trip complaints, and torch-front-end isolation
MA200TS	job packet	one-second shutdown, feed at power-up, maxed display, and MIG-only faults
M185	job packet	no-feed plus bad-display overlap, display drift, and torch-versus-display separation
P40	job packet	no HF, HF but no OCV, air with no cut, and switch-power drift

If the packet proves the complaint is external, stop before internal repair and move into the matching official parts path.
A100: accessories path, ground clamp 07000461, holder 07000460, but only after correct polarity and a supported stick baseline are proven
A220: accessories path, ground clamp 07000461, holder 07000460, but only after correct polarity and a supported stick baseline are proven
F130: accessories path, contact tip KOM32135, product page
MA200TS: accessories path, aluminum kit XOM99035, product page
M185: product page, torch KAM31003, contact tip KOM32135
P40: accessories path, electrode 07Y2517003, owner manual